LDaemon 错误代码表_MDaemon Server

0x00 0 LDAP_SUCCESS: Indicates the requested client operation completed successfully.

0x01 1 LDAP_OPERATIONS_ERROR: Indicates an internal error. The server is unable to respond with a more specific error and is also unable to properly respond to a request. It does not indicate that the client has sent an erroneous message.

0x02 2 LDAP_PROTOCOL_ERROR: Indicates that the server has received an invalid or malformed request from the client.

0x03 3 LDAP_TIMELIMIT_EXCEEDED: Indicates that the operation's time limit specified by either the client or the server has been exceeded. On search operations, incomplete results are returned.

0x04 4 LDAP_SIZELIMIT_EXCEEDED: Indicates that in a search operation, the size limit specified by the client or the server has been exceeded. Incomplete results are returned.

0x05 5 LDAP_COMPARE_FALSE: Does not indicate an error condition. Indicates that the results of a compare operation are false.

0x06 6 LDAP_COMPARE_TRUE: Does not indicate an error condition. Indicates that the results of a compare operation are true.

0x07 7 LDAP_AUTH_METHOD_NOT_SUPPORTED: Indicates that during a bind operation the client requested an authentication method not supported by the LDAP server.

0x08 8 LDAP_STRONG_AUTH_REQUIRED: Indicates one of the following:

In bind requests, the LDAP server accepts only strong authentication.
In a client request, the client requested an operation such as delete that requires strong authentication.
In an unsolicited notice of disconnection, the LDAP server discovers the security protecting the communication between the client and server has unexpectedly failed or been compromised.

0x09 9 LDAP_REFERRAL_V2: Partial results and referrals received.

0x0A 10 LDAP_REFERRAL: Does not indicate an error condition. In LDAPv3, indicates that the server does not hold the target entry of the request, but that the servers in the referral field may.

0x0B 11 LDAP_ADMINLIMIT_EXCEEDED: Indicates that an LDAP server limit set by an administrative authority has been exceeded.

0x0C 12 LDAP_UNAVAILABLE_CRITICAL_EXTENSION: Indicates that the LDAP server was unable to satisfy a request because one or more critical extensions were not available. Either the server does not support the control or the control is not appropriate for the operation type.

0x0D 13 LDAP_CONFIDENTIALITY_REQUIRED: Indicates that the session is not protected by a protocol such as Transport Layer Security (TLS), which provides session confidentiality.

0x10 16 LDAP_NO_SUCH_ATTRIBUTE: Indicates that the attribute specified in the modify or compare operation does not exist in the entry.

0x11 17 LDAP_UNDEFINED_TYPE: Indicates that the attribute specified in the modify or add operation does not exist in the LDAP server's schema.

0x12 18 LDAP_INAPPROPRIATE_MATCHING: Indicates that the matching rule specified in the search filter does not match a rule defined for the attribute's syntax.

0x13 19 LDAP_CONSTRAINT_VIOLATION: Indicates that the attribute value specified in a modify, add, or modify DN operation violates constraints placed on the attribute. The constraint can be one of size or content (string only, no binary).

0x14 20 LDAP_TYPE_OR_VALUE_EXISTS: Indicates that the attribute value specified in a modify or add operation already exists as a value for that attribute.

0x15 21 LDAP_INVALID_SYNTAX: Indicates that the attribute value specified in an add, compare, or modify operation is an unrecognized or invalid syntax for the attribute.

0x20 32 LDAP_NO_SUCH_OBJECT: Indicates the target object cannot be found. This code is not returned on following operations.

0x21 33 LDAP_ALIAS_PROBLEM: Indicates that an error occurred when an alias was de-referenced.

0x22 34 LDAP_INVALID_DN_SYNTAX: Indicates that the syntax of the DN is incorrect. (If the DN syntax is correct, but the LDAP server's structure rules do not permit the operation, the server returns LDAP_UNWILLING_TO_PERFORM)

0x23 35 LDAP_IS_LEAF: Indicates that the specified operation cannot be performed on a leaf entry. (This code is not currently in the LDAP specifications, but is reserved for this constant) 0x24 36 LDAP_ALIAS_DEREF_PROBLEM: Indicates that during a search operation, either the client does not have access rights to read the aliased object's name or dereferencing is not allowed.

0x30 48 LDAP_INAPPROPRIATE_AUTH: Indicates that during a bind operation, the client is attempting to use an authentication method that the client cannot use correctly. For example, either of the following cause this error:

The client returns simple credentials when strong credentials are required.
The client returns a DN and a password for a simple bind when the entry does not have a password defined.

0x31 49 LDAP_INVALID_CREDENTIALS: Indicates that during a bind operation one of the following occurred:

The client passed either an incorrect DN or password.
The password is incorrect because it has expired, intruder detection has locked the account, or some other similar reason.

0x32 50 LDAP_INSUFFICIENT_ACCESS: Indicates that the caller does not have sufficient rights to perform the requested operation.

0x33 51 LDAP_BUSY: Indicates that the LDAP server is too busy to process the client request at this time but if the client waits and resubmits the request, the server may be able to process it then.

0x34 52 LDAP_UNAVAILABLE: Indicates that the LDAP server cannot process the client's bind request, usually because it is shutting down.

0x35 53 LDAP_UNWILLING_TO_PERFORM: Indicates that the LDAP server cannot process the request because of server-defined restrictions. This error is returned for the following reasons:

The add entry request violates the server's structure rules.
The modify attribute request specifies attributes that users cannot modify.
Password restrictions prevent the action.
Connection restrictions prevent the action.

0x36 54 LDAP_LOOP_DETECT: Indicates that the client discovered an alias or referral loop, and is thus unable to complete this request.

0x40 64 LDAP_NAMING_VIOLATION: Indicates that the add or modify DN operation violates the schema's structure rules. For example:

The request places the entry subordinate to an alias.
The request places the entry subordinate to a container that is forbidden by the containment rules.
The RDN for the entry uses a forbidden attribute type.

0x41 65 LDAP_OBJECT_CLASS_VIOLATION: Indicates that the add, modify, or modify DN operation violates the object class rules for the entry. For example, the following types of request return this error:

The add or modify operation tries to add an entry without a value for a required attribute.
The add or modify operation tries to add an entry with a value for an attribute which the class definition does not contain.
The modify operation tries to remove a required attribute without removing the auxiliary class that defines the attribute as required.

0x42 66 LDAP_NOT_ALLOWED_ON_NONLEAF: Indicates that the requested operation is permitted only on leaf entries. For example, the following types of requests return this error:

The client requests a delete operation on a parent entry.
The client request a modify DN operation on a parent entry.

0x43 67 LDAP_NOT_ALLOWED_ON_RDN: Indicates that the modify operation attempted to remove an attribute value that forms the entry's relative distinguished name.

0x44 68 LDAP_ALREADY_EXISTS: Indicates that the add operation attempted to add an entry that already exists, or that the modify operation attempted to rename an entry to the name of an entry that already exists.

0x45 69 LDAP_NO_OBJECT_CLASS_MODS: Indicates that the modify operation attempted to modify the structure rules of an object class.

0x46 70 LDAP_RESULTS_TOO_LARGE: Reserved for CLDAP.

0x47 71 LDAP_AFFECTS_MULTIPLE_DSAS: Indicates that the modify DN operation moves the entry from one LDAP server to another and thus requires more than one LDAP server.

0x50 80 LDAP_OTHER: Indicates an unknown error condition. This is the default value for NDS error codes which do not map to other LDAP error codes.

0x51 81 LDAP_SERVER_DOWN: Cannot contact the server.

0x52 82 LDAP_LOCAL_ERROR: Local error occurred.

0x53 83 LDAP_ENCODING_ERROR: Encoding error occurred.

0x54 84 LDAP_DECODING_ERROR: Decoding error occurred.

0x55 85 LDAP_TIMEOUT: The search was aborted due to exceeding the limit of the client side timeout parameter.

0x56 86 LDAP_AUTH_UNKNOWN: Unknown authentication error occurred.

0x57 87 LDAP_FILTER_ERROR: The search filter is bad.

0x58 88 LDAP_USER_CANCELLED: The user cancelled the operation.

0x59 89 LDAP_PARAM_ERROR: A bad parameter was passed to a routine.

0x5a 90 LDAP_NO_MEMORY: The system is out of memory.

0x5b 91 LDAP_CONNECT_ERROR: Cannot establish the connection.

0x5c 92 LDAP_NOT_SUPPORTED: The feature not supported.

0x5d 93 LDAP_CONTROL_NOT_FOUND: The LDAP function( LDAP_PARSE_PAGE_CONTROL, LDAP_PARSE_SORT_CONTROL or LDAP_PARSE_VLV_CONTROL ) did not find the specified control.

0x5e 94 LDAP_NO_RESULTS_RETURNED: Results are not returned.

0x5f 95 LDAP_MORE_RESULTS_TO_RETURN: More results are to be returned.

0x60 96 LDAP_CLIENT_LOOP: Client loop was detected.

0x63 97 The referral limit has been exceeded.