CISCO 4006 IOS启动问题

1/6/2008来源:Cisco网络人气:3337


  cisco 4006 help!!!
  大家侃侃这样是什么问题?
  该怎么解决,我对cisco不熟。
  ROMMON: Entered init
  ROMMON: Cold Reset frame @0x00000000
  ROMMON: Reading reset reason register
  ROMMON: Valid NVRAM config
  
  System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
  Copyright (c) 2000 by cisco Systems, Inc.
  
  ROMMON: Initializing exceptions
  ROMMON: Initializing TLB
  ROMMON: Initializing cache
  ROMMON: Sizing and zeroing main memory ... 64 MBytes
  ROMMON: Sizing non-volatile memory ... 128 KBytes
  ROMMON: Exiting init
  
  Catalyst-4232 platform with 65536 Kbytes of main memory
  
  loadPRog: bad file magic number: 0x0
  open: failed to find and/or load the bootloader: "bootFlash:running-config"
  loadprog: error - on file open
  boot: cannot load "cisco2-Catalyst-4232"
  
  ROMMON: Entered init
  ROMMON: Warm Reset frame @0x00000000
  ROMMON: Valid NVRAM config
  
  System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
  Copyright (c) 2000 by cisco Systems, Inc.
  
  ROMMON: Initializing exceptions
  ROMMON: Initializing TLB
  ROMMON: Initializing cache
  ROMMON: Sizing and zeroing main memory ... 64 MBytes
  ROMMON: Sizing non-volatile memory ... 128 KBytes
  ROMMON: Exiting init
  
  Catalyst-4232 platform with 65536 Kbytes of main memory
  
  loadprog: bad file magic number: 0x0
  boot: cannot load "bootflash:"
  
  ROMMON: Entered init
  ROMMON: Warm Reset frame @0x00000000
  ROMMON: Valid NVRAM config
  
  System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
  Copyright (c) 2000 by cisco Systems, Inc.
  
  ROMMON: Initializing exceptions
  ROMMON: Initializing TLB
  ROMMON: Initializing cache
  ROMMON: Sizing and zeroing main memory ... 64 MBytes
  ROMMON: Sizing non-volatile memory ... 128 KBytes
  ROMMON: Exiting init
  
  Catalyst-4232 platform with 65536 Kbytes of main memory
  
  loadprog: bad file magic number: 0x0
  boot: cannot load "bootflash:"
  
  ROMMON: Entered init
  ROMMON: Warm Reset frame @0x00000000
  ROMMON: Valid NVRAM config
  
  System Bootstrap, Version 12.0(7)W5(15b) RELEASE SOFTWARE
  Copyright (c) 2000 by cisco Systems, Inc.
  
  ROMMON: Initializing exceptions
  ROMMON: Initializing TLB
  ROMMON: Initializing cache
  ROMMON: Sizing and zeroing main memory ... 64 MBytes
  ROMMON: Sizing non-volatile memory ... 128 KBytes
  ROMMON: Exiting init
  
  Catalyst-4232 platform with 65536 Kbytes of main memory
  
  rommon 1 >
  
  loadprog: bad file magic number: 0x0
  open: failed to find and/or load the bootloader: "bootflash:running-config"
  loadprog: error - on file open
  boot: cannot load "cisco2-Catalyst-4232"
  
  看起来象FLASH中的IOS坏了。
  但再看看,好象你在配置文件中错误的输入了BOOT SYSTEM CISCO2-CATALYST-4232一句
  
  我找到问题所在了,我现在说说我的操作。我先将reg改为0x2142 reset 然后copy start run,然后改了reg为0x2102,但是没有保存就reload了(我到现在还是不明白我的bootldr怎么会改成了bootflash:running-config,有可能是在这里出现的问题)。在reload以后就找不到ios的,因为在上面的提示可以看到,他在启动的时候是load flash里面的cisco2-Catalyst-4232,但是我的ios根本就不是这个名字。所以up不起来。 在这时,我在rommon 1 >下面想看看flash里面的东西,主要是ios。我就在rommon 1 >下面运行 dir bootflash,还有 dir flash 和dir boot flash 结果他都说错的设备名,后来实在没办法问了一个cisco的技术支持工程师才知道在要用 dir bootflash: 后面要加:号的。。。(555 到了这里我才发现在这方面自己真是知道地很少,很多东西都停留在理论上,很不爽。)。然后在运行boot bootflash:xxxx.bin 才把系统up起来。。。。。。。。。 然后该了reg和bootldr 保存&reboot 搞定。