Ubuntu安装VirtualBox的错误解决

5/13/2009来源:Ubuntu教程人气:6874

今天晚上在Ubuntu8.04下准备安装VirtualBox,发现“立可得软件包管理器”里面可以更新到最新的VirtualBox,于是把原先的替换掉了。
   接下来按照正常的方法把环境配置好后,出现了两个另外的问题。
    问题一:启动提示VirtualBox kernel driver not installed.
    问题描述:
    VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.
    VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED)。
    Result Code:
    0x80004005
    Component:
    Console
    Interface:
    IConsole {1dea5c4b-0753-4193-b909-22330f64ec45} [bitsCN_com]
    解决办法:
    sudo apt-get install virtualbox-ose-source
    安装模块源码然后
    cd /usr/src
    解压源码
    sudo tar xjvf virtualbox*.bz2
    cd modules/virtualbox-ose
    sudo ./build_in_tmp install
    让他编译安装模块驱动
    完成后
    xiaoxu@xiaoxu:/usr/src/modules/virtualbox-ose$ sudo /etc/init.d/vboxdrv start
    * Starting VirtualBox kernel module vboxdrv [ OK ]
    就可以看到加载成功了,启动virtualbox也没有问题了。
    问题二:启动提示The VirtualBox kernel driver is not accessible to the current user.
    问题描述:
    The VirtualBox kernel driver is not accessible to the current user. Make sure that the user has write permissions for /dev/vboxdrv by adding them to the vboxusers groups. You will need to logout for the change to take effect..
    VBox status code: -1909 (VERR_VM_DRIVER_NOT_ACCESSIBLE).
    Result Code:0x80004005
    解决办法:
    sudo chmod ugo+rw /dev/vboxdrv
    或者 
    解决的方法:
    sudo chmod 777 /dev/vboxdrv
    然后,VIrtualBox就能正常启动啦。