LvsDR模式配置

11/26/2015来源:Linux教程人气:1311

#!/bin/bash
#lvs setting
#Dip# eth0:192.168.233.145
#VIP# eth0:0 192.168.233.250/32

#RIP1:192.168.233.146
#RIP2:192.168.233.147
#VIP# 192.168.233.250/32



case $1 in

rip)
#VIP:
iptables -F
setenforce 0
echo 1 >/PRoc/sys/net/ipv4/conf/lo/arp_ignore
echo 1 >/proc/sys/net/ipv4/conf/all/arp_ignore
echo 2 >/proc/sys/net/ipv4/conf/lo/arp_announce
echo 2 >/proc/sys/net/ipv4/conf/all/arp_announce
ifconfig lo:0 192.168.233.250 netmask 255.255.255.255 broadcast 192.168.233.250 up
route add -host 192.168.233.250 dev lo:0

;;
dip)

#DIP:
iptables -F
setenforce 0

echo 1 >/proc/sys/net/ipv4/ip_forward
ifconfig eth0:0 192.168.233.250 netmask 255.255.255.255 broadcast 192.168.233.250 up
ipvsadm -C
ipvsadm -A -t 192.168.233.250:80 -s wlc
ipvsadm -a -t 192.168.233.250:80 -r 192.168.233.146 -g
ipvsadm -a -t 192.168.233.250:80 -r 192.168.233.147 -g
ipvsadm -Ln
;;

esac
#End#